How to make the MOTO 1 AUTO
These are one of the rovers by lynxmotion You just need the body, all the other parts, like the motors, wires, etc, should be bought seperately. It's not necessary you need to get the lynxmotions kit itself. You can get any other kit, Just remember to buy only the body and the tyres. Rest all you need to buy seperately.
A microcontroller is very expensive, so you just need to buy one of them to do all the projects. When buying, take a wise decision. In our tutorials we will be using the Arduino microcontrollers. Buy an Arduino uno and you can make any robot you want.
Name : Moto 1
Task: It moves front and back( This is the best robot to get started.)
CPU (Brain of the robot used): Arduino uno
Parts needed :
1.
A rover body. Like I said you can get any rover body either by lynxmotion, or anything else.
2.
Arduino uno. You need a microcontroller to controll the robot. You can use any arduino microcontroller for this project.
3.
Motors and a gear box. You should get four motors and gear boxes together from any online store. You may even get the motors and gears when you buy the body.
4.
Dupont wires. You can get a few male-male header dupont wires from an online store.
CODE
5.
Normal switch. You can get a normal two-pin switch from any electronic shops nearby.
6.
SOLDERING IRON AND LEAD
If you want the connections to be firm, and if you don't wan't them to get detatched easily, soldering can be used (Note: Soldering iron is to be used only by 15+ or with adult assistance).
7.
Double sided tape and insulation tape
Double sided tape and insulation tape might be needed.
1
BODY
After you buy the body of the robot, you should assemble it. Some may be assembled aldredy, but in some you'll have to assemble it.
Don't fix the tyres for now. We will do that in the last. When assembling, make sure you keep the top part open at first. This is for easy assembling. So basically there will just be the base.
THANK
you
for choosing
